Lenticular 3D - Unit 6
Lenticular is a 3d form of photography allowing you to show two images on one print. This is done with triangular prisms side by side with one image on one of the surfaces and another on the other side.
Final Piece - Motion Time lapse
I had previously created a time lapse of this location but it to me wasn't good enough due to a couple reasons, one being that it wasn't that long of a video, I wanted it to be a little bit longer. The other reason was that during shooting the the time lapse i had moved the camera while it was taking the images by accident, this resulted in the framing being different so in around the middle of it the shot jumps to a slightly different shot, which I was not happy with. So I resulted to re-shooting the images to create a new time lapse and this is what the end piece was. To create this time-lapse I used a sturdy tripod were I made sure that the legs and positioning of the camera was all locked into place after I had lined the shot that I wanted up with the camera. I used an Intervalometer or timer remote controller that simply plugs into your camera, I set the settings to end up taking a shot every 6 seconds after each exposure had completed as each shot was exposed for 4
Comments
Post a Comment